310 MHz Frequency Radio Controls

Digi-Code Garage Door Opener Universal Radio Control Kit with 1 Remote Control 5102-1

5102-1

$54.95

• Upgrades old discontinued door opener remote controls and/or receivers.
• 310 MHZ Frequency - 10 switch code settings.
• Includes Receiver, 1 remote control, 24 volt power transformer and installation instructions.
• Simple to install and set up.

Digi-Code Garage Door Opener Universal Radio Control Kit with 2 Remote Controls 5102-2

5102-2

$69.95

• Upgrades old discontinued door opener remote controls and/or receivers.
• 310 MHZ Frequency - 10 switch code settings.
• Includes Receiver, 2 remote controls, 24 volt power transformer and installation instructions.
• Simple to install and set up.

Digi-Code Garage Door Opener Universal Radio Control Kit with 3 Remote Controls 5102-3

5102-3

$84.95

• Upgrades old discontinued door opener remote controls and/or receivers.
• 310 MHZ Frequency - 10 switch code settings.
• Includes Receiver, 3 remote controls, 24 volt power transformer and installation instructions.
• Simple to install and set up.

Digi-Code Garage Door Opener 24 Volt Radio Control 5102

5102

$34.95

• External 24 volt receiver.
• 310 MHZ Frequency - 10 switch code settings.
• 3 tab connection.

Digi-Code Gate Opener 12 Volt Radio Control 5112

5112

 $45.00

• External 12 volt gate opener receiver.
• 310 MHZ Frequency - 10 switch code settings.
• Compatible with all Stanley 310 frequency remotes and DigiCode 5012 and 5042 garage door opener and gate operator remote controls.
• Instructions and antenna included.

Multi-Code Garage Door and Gate Opener Receiver 1099-50

1099-50

$38.95

• Gate and garage door opener receiver.

• Operates at 12 - 24 Volts AC or 10.5 - 30 Volts DC.

• Will operate one device, 10 dip switches, single channel.

• Works with Multi-Code 300 MHz or Stanley 310 MHz remotes, but not both at the same time.

• 300 or 310 MHz jumper-selectable frequency adjustment.

• Replaces 1099-30 or 1090CX receivers.

• Includes 9.5" whip antenna, 3 feet of 75 ohm coaxial cable (for longer range), bulkhead connector, mounting hardware, and complete installation instructions.

300 MHz Frequency Radio Controls

Multi-Code Garage Door Opener Receiver ONLY 1090

1090

$27.95

• Multi-Code Receiver ONLY

• 300 MHz frequency.

• 10 switch code settings.

• Universal receiver will work on any door and gate opener.

• 11" wire antenna included.

• Dimensions 3" x 5 1/2" x 1 1/2 inches.

• Three tabs for universal operator mounting.

• Connection to any three-terminal 24volt operator.

• No need for separate transformer or adapter.

Multi-Code Garage Door Opener Receiver with 1-3089 Remote 1090-1

1090-1

$38.95

• Multi-Code Receiver with 1-3089 remote.

• 300 MHZ frequency.

• 10 switch code settings.

• Universal receiver will work on any door and gate opener.

• 11" wire antenna included.

• Dimensions 3" x 5 1/2" x 1 1/2 inches.

Multi-Code Garage Door Opener Receiver with 2-3089 Remotes 1090-2

1090-2

$50.95

• Multi-Code Receiver with 2-3089 remotes.

• 300 MHZ frequency.

• 10 switch code settings.

• Universal receiver will work on any door and gate opener.

• 11" wire antenna included.

• Dimensions 3" x 5 1/2" x 1 1/2 inches.

Multi-Code Garage Door Opener Receiver with 3-3089 Remotes 1090-3

1090-3

$62.95

• Multi-Code Receiver with 3-3089 remotes.

• 300 MHZ frequency.

• 10 switch code settings.

• Universal receiver will work on any door and gate opener.

• 11" wire antenna included.

• Dimensions 3" x 5 1/2" x 1 1/2 inches.

Digi-Code 24 Volt Transformer  5192-07

5192-07

$11.95

• 24 Volt Transformer
• Used to power up external garage door openers and gate operator receivers.